• Category Archives Used Inventory
  • 2001 Wilkie 87ft Crane-Low Mileage! Garaged Indoors!

    Posted on by JSmith

    2001 Wilkie Front

    2001 Wilkie 87ft Crane
    87ft working height
    Continuous rotation
    Four non-hydraulic out & down outriggers
    Crane rating: 6500 lbs.
    18ft wood flatbed
    Three telescoping booms with full ladder on crane
    One-man removal non-remote bucket
    Under body tool boxes

    2001 GMC TopKick 7500
    GVW: 33,000 lbs.
    246 HP Cat 3126 7.2-liter diesel engine
    Air brakes
    Air conditioned
    AM/FM radio
    CD player
    Full deck over cab to front bumper expanded metal w/ 8ft tool box
    Mileage: 48,300

    Truck was inherited when new owners purchased sign company. It was hardly used & stored indoors in their shop. Only took out a couple of times a year, but enough to keep in good running order. Very nice condition due to low usage & proper storing!

    Note: Current work/repairs completed: Full scheduled maintenance including lube, oil & all fluids, new muffler & brake modulator valves. Greased front end & inspected suspension. All necessary items replaced or repaired.

    Contact: info@jscranesales.com or jimmysmith@jscranesales.com or feel free to call direct at 770-329-6107.

    All used trucks sold as-is, no warranty available.

    JS Crane Sales is currently looking for man lift trucks (2000 or newer). Elliott preferred. However, we consider any type in good condition. No Skyhooks. Looking for sign trucks in good working order only. We request if your truck will not pass a DOT/OSHA inspection, please list needed repairs. We want to be upfront and honest to all our potential buyers on a truck’s condition.

    More Photos Banner
    Request More Info Banner


  • 2008 VersaLift LT-62 New Engine

    Posted on by JSmith

    2008 VersaLift Right Side

    2008 VersaLift LT-62-NE

    69ft working height/27.83ft side reach
    Three stage hydraulic telescoping booms
    Continuous rotation of main boom
    Stowed travel height 11.93ft
    Height to bottom of man work platform 63.92ft
    Two man work platform
    Platform capacity 440 lbs.
    No material handling capacity
    Hydraulic controls – electric/hydraulic
    Base lower controls & remote controls at man work platform
    Front & rear, hydraulic outriggers w/controls at rear of truck
    110 volt electric power at truck & up to man platform, w/outlets
    12 volt back-up power, back up alarm
    Engine remote start/stop in man work platform
    Behind cab aluminum lamp cross box
    Under body aluminum tool boxes
    16ft wood flat bed

    2008 Ford F550
    GVW 19,500 (non-CDL)
    6.4L PowerStroke 350hp diesel engine
    Automatic transmission
    Air condition
    AM/FM stereo radio
    Cruise control
    Power windows, locks & handles
    Leather seats
    Trailer hitch
    Engine replaced at 117,786 miles
    Mileage: 121,275

    Note: Engine replaced at 117,786 miles. New engine has only approximately 4,489 miles on it.

    Price: $42,500.00 plus transportation.

    Contact: info@jscranesales.com or jimmysmith@jscranesales.com or feel free to call direct at 770-329-6107

    All used trucks sold as-is, no warranty available.

    JS Crane Sales is currently looking for man lift trucks (2000 or newer). Elliott preferred. However, we consider any type in good condition. No Skyhooks. Looking for sign trucks in good working order only. We request if your truck will not pass a DOT/OSHA inspection, please list needed repairs. We want to be upfront and honest to all our potential buyers on a truck’s condition.

    More Photos Banner
    Request More Info Banner


  • 2004 RAM Antares 180T3

    Posted on by JSmith

    Truck Sold

    2004 RAM Antares 180T3: 60ft working height / 50ft side reach / 2000 lbs capacity main boom winch / Electric rotating two-man aluminum work platform / Controls in platform & base lower controls / Continuous rotation of the main boom / Boom is wired for AC power with outlet in platform / Front & rear hydraulic out & down outriggers / Various above & underbody tool boxes

    2004 Chevrolet Model 4500: 360 hp gas engine / GVW 14,500 / 6-speed manual transmission / AM & FM stereo radio / Air conditioned / Cruise control / 16 ft steel plate flat-bed platform / Easy-step up skirted back bumper / Mileage: 119,481 miles

    NOTE: Brand New 2000 lbs main boom winch (to be added at sale of machine)

    Price: $42,500.00 plus transportation – special affordable transport rates

    More Photos Banner
    Request More Info Banner


  • 2007 Elliott H110

    Posted on by JSmith

    chassis

    2007 Elliott ECH-5-110: 115ft working height / 84ft side reach / 14,000 lbs hydraulic main boom winch crane / 40” x 60” EZR hydraulic removable rotating & leveling platform / 500 lbs. capacity two-man platform / Hydraulic remote lever controls in platform & base lever lower controls / 110 volt line to platform with receptacles / Engine remote start & stop with 12 volt back up power / Hydraulic front “H” style out & down and “A” frame rear outriggers / Pressure washer / Hydraulic generator / Various under & upper tool boxes

    2007 International 7400 6×6: GVW 46,000 / Diesel engine / Automatic transmission / Extended cab / AM & FM stereo radio / Air conditioned / Cruise control / 20ft steel tread flatbed / Trailer hitch / Mileage: 104,231 / Hours: 2145

    Price: $165,000.00 plus transportation – special affordable transport rates

    More Photos Banner
    Request More Info Banner


  • 1998 Elliott ECH-5-135 – Brand New Installed 14K Main Boom Winch Load Line

    Posted on by JSmith

    right side

    1998 Elliott ECH-5-135: Fully refurbished / 140 ft working height / 84ft side reach / Brand New Installed 14K Main Boom Winch Load Line / 30” x 54” EZR hydraulic removable rotating & leveling platform / 500 lbs. capacity two-man platform / Non-continuous boom rotation with stop / Hydraulic remote lever controls in platform & base lever lower controls / Rotating stand-up lower control on turntable / 110 volt line to platform with receptacles / Engine remote start & stop with 12 volt back up power / Hydraulic front “H” style out & down and rear outriggers / Outrigger pads with mounted platform storage rack / Various under & upper tool boxes / Hours: 5,517

    1998 International IHC / GVW 60,000 / DT 466 300 hp diesel engine / Fuller 8LL manual transmission / Power divider & wheel lock / AM & FM stereo radio / Air conditioned / Cruise control / RH 100 gallon aluminum fuel tank / 24ft steel tread flatbed / Gross weight 64,260 / Front bumper mounted platform storage rack / Safety chain eyes / 7-way trailer socket / Splash aprons / Mileage: 70,195

    Price: $100,000.00 plus transportation – special affordable transport rates

    More Photos Banner
    Request More Info Banner


  • 1999 Elliott H153 – Brand New Installed 14K Main Boom Winch Load Line

    Posted on by JSmith

    front

    1999 Elliott H153: Fully refurbished / 158 ft working height / 70 ft side reach / Brand New Installed 14K Main Boom Winch Load Line /30” x 54” EZR hydraulic removable rotating & leveling platform / 500 lbs capacity two-man platform / non-continuous boom rotation with stop / Hydraulic remote lever controls in platform & base lever lower controls / Rotating stand-up lower control on turntable / 110 volt line to platform with receptacles / Engine remote start & stop with 12 volt back up power / Hydraulic front “H” style out & down and rear outriggers / Outrigger pads with mounted platform storage rack / 18” x 18” x 30” RH steel underbody tool box / Various under & upper tool boxes

    1999 Kenworth T800 6×4: GVW 60,000 / 3306 Caterpillar 300 hp diesel engine / Fuller 8LL manual transmission / Power divider & wheel lock / AM & FM stereo radio / Air conditioned / Cruise control / RH 100 gallon aluminum fuel tank / 24ft steel tread flatbed / Cab to axel: 174” / Front axle: 20,000 lbs / rear axle 40,000 lbs / Steer tires: 425 – 75R 22.5 / Steer axle to front drive: 221” /Drive tires: 11R – 22.5 / Front drive to rear drive: 54” / Rear drive to tag axle: 54” / Additional auxiliary lift axle will be added in front of existing rear axles / Gross weight 64,260 / Front bumper mounted platform storage rack / Safety chain eyes / 7-way trailer socket / Splash aprons / Mileage: 107,000

    Price: $120,000.00 plus transportation – special affordable transport rates.

    More Photos Banner
    Request More Info Banner


  • 2000 SkyHoist RX87

    Posted on by JSmith

    Main Pic

    1996 Sponco IHM-55

    This machine is in good working order. The chassis has cosmetic needs; shown in photos. Engine and machine are sound. Price: $69,000.00 plus transportation – special affordable transport rates.

    More Photos Banner

    Request More Info Banner



  • dinamic_sidebar 4 none